Samson 3271-5, Mounting And Operating Instructions

Page: 20 / 52

20 EB 8310-1 EN
Preparation
4 Preparation
After receiving the shipment, proceed as fol-
lows:
1. Check the scope of delivery. Compare
the shipment received against the deliv-
ery note.
2. Check the shipment for transportation
damage. Report any damage to
SAMSON and the forwarding agent (re-
fer to delivery note).
4.1 Unpacking
Do not remove the packaging until
immediately before mounting.
Proceed as follows to lift and mount the actu-
ator:
1. Remove the packaging from the actuator.
2. Dispose of the packaging in accordance
with the valid regulations.
4.2 Transporting and lifting
SAMSON's After-sales Service department
can provide more detailed transport and lift-
ing instructions on request.
4.2.1 Transporting
The actuator can be transported using lifting
equipment (e.g. crane or forklift).
Î Leave the actuator in its transport con-
tainer or on the pallet to transport it.
Î
Observe the transport instructions.
Transport instructions
−
Protect the actuator against external in-
fluences (e.g. impact).
−
Do not damage the corrosion protection
(paint, surface coatings). Remove any
damage immediately.
−
Protect the actuator against moisture and
dirt.
−
The permissible transportation tempera-
ture is between –20 and +65 °C.
4.2.2 Lifting
Due to the low service weight, lifting equip-
ment is not required to lift the actuator (e.g.
to mount it onto a valve).
See valve documentation for more
information on lifting the entire control valve
assembly.
Note
Tip
Note