HDV
Routing switchers
Sams elektronik d.o.o. • [email protected] • www.sams.rs
elektronik
19
ICONS
OPEN: Load status of matrix
SAVE: Save status of matrix
PROPERTIES: Configure the com port and selects type of signal that will be controlled
LOCK PANEL: Locks software
UNDO: Returns a step backward state of matrix for the selected destination
LOCK: Locks destination
VIDEO: Controls whether this kind of signal interconnect
AUDIO 1 (AUDIO 1 - AUDIO2): Controls whether this kind of signal interconnect
AUDIO 2 (DATA): Controls whether this kind of signal interconnect
SOURCE NAME: Name of input
DESTINATION NAME: Name of output
SOFTWARE
At start, there will be an indicator of communication with the master command. If communication is
realized, at the intersection of XY axes are displayed connections as icons:
VIDEO:
AUDIO 1 (AUDIO 1 - AUDIO 2): - red icon
AUDIO 2 (DATA): - green icon
If the indicator of communication retain more than one minute:
1. The communication parameters are not set
2. The main remote control is not powered on or connected to a PC.
GETTING STARTED
Software RS-6464 is designed to control the matrix. It has the same features as the master command.
The advantage of the software is that the status of the matrix can be seen at the same time for all
connections in the form of intersection of X and Y axes.
Start the program.
indicator of communication
