HDV
Routing switchers
elektronik
Sams elektronik d.o.o. • [email protected] • www.sams.rs
20
PROPERTIES
Press the “Properties” button or keyboard shortcut Ctrl + P to set the communication parameters.
It is very important to choose the correct serial port to COM selection. Here you can set which types of
signals will be used: Video-Audio1-Audio2 or Video-Audio1/2-Data. After setting, press OK. If the correct
port is selected and if the command is connected to the PC, in the top right corner of the main window,
there will be an indicator “connected” with green background. Will not be displayed properly unless you
do not connect, or if the the master remote control is turned off.
Properties menu
Choosing the serial port
The connection is established
NAMING OF SOURCES
Each source can get their name based on the conditions of the matrix. This feature is very useful
for subsequent configuration of additional commands, but to get a clearer insight into what actually
connects.
Double click the left mouse button over the default names of the sources, a window opens where you
can rename the source. After renaming press OK.
Type a new name in the field
