background image

M6

M2

M3

M4

M5

M8

M9 M10

M7

M11

M12

M12

M13

M14

www.larius.com

23

ED. 04 - 04/2021 - Cod. 150183

LARIUS GHIBLI MIX 2K

Alphanumeric page: It will be used to write names where 
prompted by the system

SYSTEM PAGES

The programming panel contains further system pages:

Numeric page: It will be used to enter the data requested by 
the system.

M2 - Numeric keypad
M3 -  Delete incorrect data
M4 - Written value
M5 - Exit button
M6 -  Confirmation button

M7 - Exit button
M8 - Written text
M9 - Alphanumeric keyboard
M10 - Confirmation button
M11 - Delete incorrect data
M12 - Upper case/lower case button

POWER STATUS

The power status is indicated by a green light located on the 
system’s ON/OFF selector.

LOCKING SELECTOR

In order to prevent unauthorised personnel from modifying the 
machine’s settings, a locking safety selector (

M13

) has been 

installed upon the panel.

The selector can be turned:
- to the right in order to allow for the machine’s settings to be 

modified.

-  to the left in order to protect the machine’s settings with a secret 

password.

User: 

Larius

Password: 

Larius

The machine is furnished with two keys 

(one spare key for use in 

the event that the regular key is lost)

.

The safety keys should be entrusted to a person who is authorised 
to modify the machine’s settings and data.

24 VDC (M14) VOLTAGE ON INDICATOR:

 Indicates the

presence of auxiliary voltage which powers all 24 VDC utilities, 
including the pLC.

Summary of Contents for LARIUS GHIBLI MIX 2K







































Reviews: