Samoa 560312 Service Manual Download Page 10

Page: 10 / 24

856 827 R. 06/18

SAMOA Industrial, S.A. · Pol. Ind. Porceyo, I-14 · Camino del Fontán, 831 · 33392 - Gijón - Spain · Tel.: +34 985 381 488 · www.samoaindustrial.com

2018_06_26-13:00

MAINTENANCE

CONTROLS

It is user responsibility to take charge of maintaining integrity
and efficiency of the container and its devices and equipment,
in particular:
- Periodically inspect the state of wear of the surfaces of the

housing, with particular regard to those of the bottom,
exposed to wear by friction with lifting systems.

- The perfect sealing of the tank, paying the utmost attention

to possible loss or leakage of the fluid at the nozzle, faucet,
suction pipes and discharge valves.

– the good condition of the inscriptions on the wrapping and,

if damaged, replace them with new ones of the same type
and in the exact same position.

CLEANING

The container and its emptying device should be kept clean both
by external agents (dirt, dust, etc.), and any accidental spills of
dangerous materials on the occasion of fills, flushes, loss.
For cleaning use non–corrosive products for metal parts and for
electrical cables and plastics in general, preferring neutral or slightly
alkaline de greasing products. Steam systems can be used (puli–
vapour steamer), provided that the jet is not directed against parts
of the electrical system or against the plates and/or adhesive plates
applied on the body of the container and on the metal frame of
the emptying device.

TAMPERING

In addition to the provisions in the following paragraph, for no
reason you are allowed to change the container as regards the
characteristics of the electric
emptying device; in particular:

It is strictly forbidden to replace equipment with other
components different from the original ones, without the
manufacturer’s warranty as regards pressure resistance

SPARE PARTS

Any modification or replacement of parts of the housing, as a
result of damage, accident or tampering, is allowed only at
SAMOA establishments or in centres authorised by it as the
operation is configured as “reconditioning”.
The use of non–original spare parts voids the manufacturer’s
warranty, if in course.

FACILITIES AND EQUIPMENT OF PERSONNEL ON BOARD

It is appropriate, in order to comply with current legislation and
legislation on health and safety at work (Decree Law 81/08 Lgs.
D. 106/2009), to have the following personal protective
equipment (PPE):
-  n° 1 pair of work gloves in accordance to EN 374
-  n° 1 pair of slip resistant boots
-  Eye protection glasses
-  Eye wash water in case of contamination.

FACILITIES AND EQUIPMENT OF THE VEHICLE

Since the transport is not subject to ADR provisions, it is not
specifically requested a special equipment for the vehicle, it is
anyway advisable that the vehicle has a suitable drain cover, a
sufficient quantity of inert material (e.g. sand) to contain and
absorb any losses, a suitable tool for collecting (e.g. shovel or
spade spark proof), a containment device.

PERSONAL PROTECTION MEANS/EQUIPMENT

RESIDUAL OBLIGATIONS/BANS/RECOMMENDATIONS

In any case the following obligations remain:
-  Use of suitable containers.
-  Make the transport safely avoiding product leakage.
-  It is necessary to respect the max. degree of talk filling.
-  Make sure that the packaging is not damaged, in particular

with reference to closures and seals.

- The parcels should be kept clean from any residue of goods to

their outside.

- Adequate stability must be guaranteed to the parcels against

any possible impact or movement on the floor of the vehicle,
ensuring the visibility of the danger labels.

- Maintain in good condition, and if necessary replace, the danger

labels.

- After any spillage of dangerous goods on the loading platform,

thoroughly clean it.

- You should have at least n° 1 ABC powder fire extinguisher min.

2 kg, suitable for extinguish the fire engine, easily accessible,
sealed and subject to six–months supervision as per label.

ABSOLUTE PROHIBITIONS