Sammic UX-40, User Manual

Page: 7 / 60

Operation
User’s manual — 2900455/0 7
EN
[Models with electric dispensers] Dispensing and hardness set -
tings
To enter this settings section, when turning on the machine, press
and hold the START button in the first few seconds while the
program is loading.
• DET DOSE g/l : dose of detergent in g/L.
• DET FILL : detergent priming: ON-OFF (LCD: " on-00 ").
a) Press PROG or OPTIONAL to activate ( on ) the detergent fill -
ing process.
> The detergent dispenser turns on for a few seconds and then returns to
OFF (00 ).
b) Press PROG or START again until the pipe is completely
filled.
• R AID DOSE g/L : rinse aid dose in g/L.
• RINSE AID FILL : rinse aid priming: ON-OFF ( on-00 ).
a) Press PROG or OPTIONAL to activate ( on ) the detergent fill -
ing process.
> The detergent dispenser turns on for a few seconds and then returns to
OFF (00 ).
b) Press PROG or START again until the pipe is completely
filled.
• [D models] WATER HARDNESS : enter the degree of water hard -
ness (unit: French degree °fH, display shows "°F"). With this data
the machine programs the regeneration frequency necessary to
inform by means of the icon .
Other activations
• [B models] WATER LEVEL (qualified technicians only): activa -
tion of tank water level display: ON-OFF ( LCD: " on-00 " ) .
– Cycle times and texts are not displayed.
• [C models] B.PRES MANUAL : manual activation of rinse pump:
ON-OFF (on-00) .
2.7.2 Other settings
To enter this settings section, when switching on the machine,
press and hold down the OPTIONALS button in the first few
seconds while the program is loading.
• LANGUAGE
• RINSE TIME : modification of the time in time range between -2
and +2 seconds (s).
• ENERGY SAVING : ON-OFF (LCD: " on-00 ") .
• SOFT START : ON-OFF ( on-00 ) . Progressive start of the wash
motor pump.
• TEMP UNITS : selection of temperature units °C/°F.
• REGEN COUNTER : displays the number of regeneration cycles
performed.
• CYCLE COUNTER : displays the number of wash cycles per -
formed.
• INITIAL SETTINGS : to restore the initial parameters of the
machine.
2.7.3 Screen test
To check that the LCD display segments are working:
1) When switching on the machine, press and hold down the
START and OPTIONAL buttons simultaneously in the
first few seconds while the program is loading.
⇒ All the screen icons light up.
2.7.4 Model settings
If the electronic board is changed or de-configured, the machine
requires the model to be adjusted by means of the following adjust -
ment section:
1) When switching on the machine, press and hold in the first
few seconds while the program is loading.
2) To choose the model number, press the buttons PROG and
OPTIONAL .
3) Confirm your selection by pressing the START button .
3 Operation
ℹ
Information
The values shown are equivalent to two digits to one decimal
place. Examples:
– 3.5 g/L: " 35 " is displayed.
– 0.5 g/L: " o5 " is displayed.
Inlet water
hardness
Number of regeneration cycles
Manual cycles Automatic cycles
UX-40 D UX-50 D UX-50 CD UX-120 CD
0-20
°fH
93 112 10 20
21-30 °fH 57 72 7 15
31-40 °fH 33 49 5 10
41-50
°fH
25 29 4 6
Model
Number
Model Model
Number
Model
2 UX-40 14 UX-50 BCD
3 UX-40 B 22 UX-100, UX-120
4 UX-40 D 23 UX-100 B, UX-120 B
5 UX-40 BD 24 UX-120 V
7 UX-50 25 UX-120 BV
8 UX-50 B 26 UX-120 C
9 UX-50 D 27 UX-120 BC
10 UX-50 BD 28 UX-120 BCD
12 UX-50 C 32 UX-120 BCV
13 UX-50 BC 33 UX-120 BCDV
Notice
Error with boiler and tank level probes
If the selected model is fitted with boiler and tank level probes
and the probes are not connected, an error message is dis -
played. Conversely, if a model is selected that is not fitted with
the probes but the machine has them, an error message is dis -
played: MODEL NUMBER ERROR .
– If this error occurs, reconfigure the machine model for the elec -
tronic board.
⚠
Warning
Risk of serious injury due to operation when the
machine is faulty
Using the machine when it is faulty or in poor condition can af -
fect personal safety and damage the machine.
– If you detect any fault or anomaly in the machine, contact an
authorised service agent immediately.