Index revision : C - March 2016
23
7105
7.3. With a pressure tank for all versions
Note: m
0
3
/h
volume at 1013 mbar atmospheric pressure and a temperature of 20°C (68°F).
You are advised to fit a pneumatic stirrer on the pressure tank to stir the paint.
A filter with a screen should be fitted at the spray gun paint hose inlet.
WARNING : For the safety of the painter, the pressure tank and the paint filter, if it is metal, must
always be electrically grounded.
1
Part to be painted
2
NANOGUN-MV
Spray Gun
3
Single-phase mains, 220 V, 50 Hz +
ground or 115 V + ground
4
Air pressure regulator 0-6 bar - 50 m
0
3
/h
(for adjusting the spraying air)
5
Compressed air network
6
Stop cocks
7
Oil-removing filter
9
Air pressure regulator 0-6 bar - 5 m
0
3
/h
For adjusting the regulator control
pressure (paint flow rate setting)
10
Filter
11
Pressure tank (complies with ATEX
Directive)
12
Potentially explosive atmosphere
13
Area with no risk of explosion
9
DES05938
GNM 6080
