SAMES KREMLIN
- 5 -
N° : 578.224.110-UK-2103
AIR VALVE (IND. 23) REPLACEMENT
For the guns, model FPRO P LP and CONV : unscrew the needle stop (22), then remove the
needle spring (20) and the needle (11a/11b) by the rear part of the gun.
For the guns, model FPRO P LOCK LP and LOCK CONV : unscrew the needle stop sleeve
(17), then remove the needle spring (20) and the needle (11) by the rear part of the gun.
Trigger the gun (36) then unscrew the needle stop sleeve (17) by means of the wrench supplied
with the gun.
Take off the valve spring (29) as well as the air valve body (24), the air valve stop (30) and the
carrier (28).
Reinstall the carrier (28) on the new air valve body (24).
Install that new assembly, the air valve stop (30), the lubricated valve spring (29) into the gun
body.
Screw the needle stop sleeve (17).
For the guns, model FPRO P LP and CONV : reinstall the needle (11a/11b), the lubricated
needle spring (20) and the needle stop (22).
For the guns, model FPRO P LOCK LP and LOCK CONV : reinstall the needle (11), the
lubricated needle spring (20) and the needle stop sleeve (17) - screwing torque : 5 Nm / 3.688
Ft/Lbs.
AIR VALVE SEAL (IND. 26) REPLACEMENT
Take off the air valve (23) - refer to previous paragraph.
Remove the seal (26).
Lubricate the new seal (26) and place it in its housing.
CAUTION : When reassembling, carefully insert the air valve (24) into the gun
body carrying out a rotary motion so as to preformate the valve seal (26).
INJECTOR (IND. 33A/33B/33C/33D/33E) REPLACEMENT
Unscrew the gun fluid hose.
Remove the injector (33a/33b/33c/33d/33e).
Check the injector condition and change it if necessary.
Reinstall the parts in the reverse order of the disassembly sequence.
NOTA : the gun can operate without injector (33a/33b/33c/33d/33e) if necessary.
