SAMES KREMLIN
- 4 -
N° : 578.224.110-UK-2103
NEEDLE PACKING (IND. 13) REPLACEMENT
Make sure there is no more paint inside the gun.
For the guns, model FPRO P LP and CONV : unscrew the needle stop (22) and remove the
needle spring (20).
For the guns, model FPRO P LOCK LP and LOCK CONV : unscrew the needle stop sleeve (17)
and remove the needle spring (20).
Remove the needle (11/11a/11b) completely by the rear part of the gun.
Dismount the trigger (36) by removing the screw (39) and the trigger spindle (38) by means of
two wrenches n° 5.5.
Unscrew the packing holder (16) by means of the wrench supplied with the gun.
Take off the needle packing (13) that consists of a seat (14) and a bearing (15).
Insert the bearing (15) into the seat (14) and replace the whole in the gun.
Screw the packing holder (16) moderately.
Reinstall the needle (11/11a/11b).
For the guns, model FPRO P LP and CONV : reinstall the lubricated needle spring (20) and the
needle stop (22).
For the guns, model FPRO P LOCK LP and LOCK CONV : reinstall the lubricated needle spring
(20) and the needle stop sleeve (17) - screwing torque : 5 Nm / 3.688 Ft/Lbs.
Tighten up the packing holder (16) by means of the wrench supplied with the gun and unscrew it
by a 1/4 turn.
Remount the trigger (36).
Feed paint
If there is a leak, screw slightly.
