SAMES KREMLIN
Page 3
Manual : 573.008.212
GUN
Never wipe the end of the tip with the fingers.
Always depressurize air and hoses before carrying out any servicing on the gun.
Never point the spray gun at anyone or at any part of the body.
PRESSURE REGULATOR
Assemble conductive hoses upstream and downstream of the regulator.
MAINTENANCE REQUIREMENTS
Guards (air motor cover, coupling shields, housings …) have been designed for
safe use of the equipment.
The manufacturer will not be held responsible for bodily injury or failure and / or
damage to property due to removal or partial removal of the guards.
Never modify these equipments.
Check them daily, keep them in a good condition and replace the worn parts
only with SAMES
KREMLIN parts
.
Before cleaning or removing components of the equipment, it is compulsory :
- to stop the pump by shutting off the compressed air supply,
- to open the pump drain valve,
- to press the gun trigger to depressurize the hoses.
2. DESCRIPTION
The pressure regulator enables to adjust the fluid pressure into the circuits of low and medium pressure.
The pressure regulator is mounted on the fluid circuit between the pump fluid outlet and the gun fluid inlet.
It enables to refine the pressure of the gun. It exits a spring operated model and an air operated model.
The back pressure regulator is mounted on the back fluid circuit. It enables to regulate a constant
pressure and to ensure at the same time a fluid circulation into the hoses.
