SAMES KREMLIN
Page 2
Manual : 573.042.212
Type
Manual control regulator (by screws)
Version
120 - 10 / 120
Pressure range :
- Inlet pressure
Maximum 120 bar / 1740 psi
- Outlet pressure
From 10 to 120 bar / from 145 to 1740 psi
Fittings :
- Fluid inlet (E)
F 3/8 NPS
- Fluid outlet (S)
F 3/8 NPS
Wetted parts
Stainless steel, PTFE, carbide
Weight
3.6 kg / 7.9 lb
Maximum temperature
50°C / 122°F
HOSES WITH FITTINGS RECOMMENDED
You must choose the hose according to the material viscosity and to the length. Make sure the hose
has a larger diameter for higher length or important viscosity.
Airmix ®
regulator
Fluid material
Semi thick material
Fitting
AIRMIX
hose
Fitting
AIRMIX
hose
Inlet (E)
M 3/8 NPT - M 1/2 JIC
4,8mm int. (1/4")
M 3/8 NPT - M 3/4 JIC
4,8 mm int. (3/16")
or 6,35 mm int. (1/4")
Outlet (S)
M 3/8 NPT - M 1/2 JIC
4,8 mm int. (3/16")
or 6,35 mm int. (1/4")
M 3/8 NPT - M 1/2 JIC
4,8 mm int. (3/16")
or 6,35 mm int. (1/4")
NOTA :
To ensure a larger lifetime of your equipment and to obtain the best flow
rate possible, you must mount the regulator in vertical position.
2. MAINTENANCE
WARNING : Before any action on the installation, shut off the compressed air
supply and depressurize the systems by triggering the spray gun.
REPLACEMENT OF THE SEAT (23)
Removal :
Unscrew the 4 screws (18) and remove the lower body (10).
Unscrew the plug (27). Remove the guide bush (21).
Push on the seat (23) to remove it from the lower body (10).
Clean the parts or replace with new parts.
Reassembly :
Change the 2 seals (26), the seat (23).
Remount the seat (23), the guide bush (21) and the plug (27).
Remount the lower body (10) and fix it via the 4 screws (18) Respect the screwing torque.
