SAMES KREMLIN
Page 3
Manual : 574.075.112
PICTOGRAMS
A
D
F
E
C
G
NIP HAZARD
WARNING
MOVING
ELEVATOR
WARNING
MOVING PARTS
WARNING
MOVING
SHOVEL
DO NOT
EXCEED THIS
PRESSURE
HIGH PRESSURE
HAZARD
H
J
L
K
M
Q
RELIEF OR
DRAIN VALVE
WARNING HOSE
UNDER
PRESSURE
WEAR GLASSES
OBLIGATORY
WEAR OF
GLOVES IS
OBLIGATORY
PRODUCT
VAPOR
HAZARDS
WARNING HOT
PARTS OR AREAS
N
P
R
ELECTRICAL
HAZARD
WARNING FIRE
HAZARDS
EXPLOSION
HAZARDS
GROUNDING
WARNING
(USER)
WARNING
SERIOUS
INJURIES
PRESSURE HAZARDS
Current legislation requires that an
air relief
shut off valve is mounted on the supply circuit of the pump
motor to let air off when closing the supply circuit. Without this precaution, the motor residual air of the
motor may let the pump beat and cause a serious injury.
Please ensure that, a
material drain valve
is mounted on the material circuit to drain it (after shutting
down air to the motor and the pressure relief) before any servicing on the equipment. These valves
must be closed for air and opened for product when processing.
HIGH PRESSURE INJECTION HAZARDS
When working with high pressure equipment, special care is required. Fluid leaks can occur.
Then there are injection risks in exposed parts of body that may cause severe injuries or
amputations :
Medical care must be handled immediately if product is injected under the skin or in
other parts of the body (eyes, fingers).
Never point the spray gun at any one. Never try to stop the spray with your hands or
fingers nor with rags or similars.
Follow the shut down procedure and always depressurize air and fluid circuits
before carrying out any servicing on the gun (cleaning, checking, maintenance of the
material or cleaning of the gun nozzles).
For the guns equipped with a safety device, always lock the trigger when you do not
start the gun.