Doc.-ID: 200917-PT08BA-ES-ExCam IPP1280_en_rev.01.docx, Page 4 of 28
1
Introduction
The ExCam IPP1280 is an unltra compact thermal network-camera for use in hazardous
areas. It is certified by ATEX and IECEx. The camera has
a thermal resolution (208x156)
and is equipped with an uncooled microbolometer. The ExCam IPP1280 is a modular ex-
network-camera. This means that it consists of two units: the ultra compact sensor unit
(lens and image sensor) and the main unit (network, power and memory card slot).
The ExCam series is certified both in accordance with the European (ATEX) and interna-
tional directive (IECEx). The explosion-protected housing is approved for the ATEX group
II for zones 1, 2, 21 and 22 including the explosion groups IIC / IIIC. For more information
please visit our website at
When designing the ExCam IPP1280, we attached a very high importance to safety, me-
chanical precision and high quality of stainless steel.
2
Technical data
2.1
Explosion protection
Identification marks
acc. to Directive 2014/34/EU:
II 2G (zone 1 and 2)
II 2D (zone 21 and 22)
Explosion protection (gas):
Ex db IIC T6 Gb
Explosion protection (dust):
Ex tb IIIC T80°C Db
Protection class:
IP 68/IP66 (IEC /EN 60529)
Transport/storage temperature:
0°C…+50°C
Ambient temperature Sensor Unit (EX): -3
0°C…+60°C
Ambient temperature Main Unit (EX):
-
20°C…+50°C
Named testing laboratory:
TÜV Rheinland (number 0035)
EU type approval certificate:
TÜV 18 ATEX 8218X (2020)
IECEx Certificate of Conformity:
TUR 18.0023X (2020)
Ex-Certificates Main unit (T08-
…-TD):
EU type approval certificate:
TÜV 10 ATEX 7969 (2016)
IECEx Certificate of Conformity:
TUR 16.0025X (2016)
EAC-Ex TUR Report:
TC RU C-
DE.AБ.61.B.00380/19
Other certificates see:
https://www.samcon.eu/en/products/network/excam-ipp1280/
Attention!
The instructions stated on the type plates have to be observed!
