Doc.-ID: 200917-PT08BA-ES-ExCam IPP1280_en_rev.01.docx, Page 15 of 28
Particularly in EMC critical environments, it is necessary to make sure that the cable shield is
grounded on side of the terminal block
!
The maximum cable length between camera and Ex-e terminal box is 25 m.
5.2.3
Connection to an ExConnection Rail / Routing into Ex-d
For cameras with the model key T08-
…-TD, the Sensor Unit is already connected to an
ExConnection Rail. The Main Unit P12 MkII is then placed in the Ex-d housing.
Figure 5-5 ExCam IPP1280
ExConnection Rail
In order to connect the cable inside the ExConnection Rail to the insulation displacement
termination, please observe the instructions given in the video tutorial as well as the Ex
installation manual T04.
Video Tutorial:
“SAMCON 06 Wiring the cable in the ex-d housing”
Figure 5-6 Video Tutorial
