146
NeoCon Controller
Σ3
Pn014
Σ5
Pn014
[ 명 칭 ]
기계원점복귀 방향
[표시메시지]
MZRN DIRECTION
【데이터단위】
0, 1
해 설
테이블의 기계원점복귀 방향을 설정합니다.
【0】: CW (테이블 상면에서 보아 시계방향 회전)
1 : CCW (테이블 상면에서 보아 반시계방향 회전)
[Name]
MZRN Direction
[Message]
MZRN DIRECTION
【Input Range】 0, 1
Description
Sets up the direction of the table returning to the machine origin.
【0】: CW (Clockwise looking from above table)
1 : CCW (Counterclockwise looking from above table)
기계원점복귀방향
Direction of returning to the machine start point
Pn014=0
Pn014=1
As shown in the Figure above, the direction is as set up in the Pn014,
regardless of the position of the starting point of the returning movement.
좌도와 같이 기계원점복귀 개시위치가 어느 위치에 있어도 Pn014에 설정된 회
전방향으로 이동합니다.
!
CAUTION
1. Pn014의 설정은 테이블 회전이 CW방향으로 동작하는 경우를 “플러스”로 했을 때의 설정입니다.
2. Pn015=1(근거리 원점복귀)를 설정하지 않는 한 본 파라미터의 설정 종류 원점복귀를 합니다.
1. The Pn014 setting is based on assumption that CW rotation of the table is plus direction.
2. Unless Pn015=1(short cut origin return) is set, the origin return will be in accordance with this
parameter's setting type.
※ 관련 파라미터 Pn015
※ Concerned Parameters : Pn015
Σ3
Pn015
Σ5
Pn015
[ 명 칭 ]
기계·가공원점 근거리 복귀
[표시메시지]
ZRN SHORT CUT DIR
【데이터범위】
0, 1, 2
해 설
테이블의 기계원점복귀, 가공원점복귀를 근거리에서 했는지 아닌지
또는 임의로 설정한 각도를 경계로 하여 근거리 원점복귀시켰는지 설정합니다.
【0】: 기계원점복귀는 어느 위치부터 복귀하여도 Pn014에서 설정시킨 방향으로 복귀하고
가공원점복귀는 반드시 플러스 방향으로 복귀합니다.(단, 모터회전방향 Pn011=0 일때)
(When the motor rotation direction is Pn011=0)
※ Pn 014의 회전방향 참조
1 : 근거리 원점복귀방향은 각각의 원점위치보다 180.000°의 위치를 경계로 하여,
180°미만이 CCW방향, 180°이상이 CW방향으로 복귀합니다
2 : 근거리 원점복귀시키고자 하는 경계각도를 임의로 설정합니다.[Pn016]
Summary of Contents for NeoCon Series
