SaMASZ Z-300 Slim, Operator'S Manual, Page: 29 / 31

Operator’s manual
Rotary rake
Z-300; Z-300 Slim; Z-301; Z-301 Slim;
Z-350; Z-350 Slim; Z-351; Z-351 Slim;
Z-410; Z-440; Z-470
- 27 -
8. MALFUNCTIONS AND THEIR REPAIRS
Defect Reason Repair
The rake leaves major part of
the swath
Lack or bent raking tines Replace tines
Too low rotation speed Increase rpm
Improper working height
Adjust operation height
according to section 5.7.
„Preparing the rake for work”
Excessive vibrations during
work
Damaged PTO shaft
Check the condition of PTO
shaft and if need be replace
Damaged raking tines Raking arms set too low
Set the raking height properly
with adjustment lever or
trolley (Z-410, Z-470)
Contamination of raked
swath
Raking tines immersed too
deep
Set larger distance between
raking arms and the ground
Twisted raking tines Replace with new ones
Oil leak in gear Gear is not tight
Examine tightness and check
oil level.
9. DISASSEMBLY AND WITHDRAWAL FROM USE
9.1. Scrapping
If the rake cannot be repaired anymore, it should be withdrawn from use
.
To do so, oil from intersecting axis gear and cutterbar should be drained and delivered to a
proper waste treatment company. Clean the rake parts, dismantle and dispose properly of all plastic
parts. After that, the rake can be scrapped.
10. WARRANTY CARD
ROTARY RAKE
The product quality has been checked and meets required standards and regulations and is permitted
for use.
NOTE: A warranty card without the required information or with corrected or illegible
information – is invalid.
Serial number
Date of manufacture
Manufacturer’s stamp
QC signature
Date of purchase
Dealer’s stamp
Dealer’s signature