Operator’s manual
Rotary rake
Z-300; Z-300 Slim; Z-301; Z-301 Slim;
Z-350; Z-350 Slim; Z-351; Z-351 Slim;
Z-410; Z-440; Z-470
- 21 -
CAUTION!
The raking arms' height should be controlled on an on-going basis while
operating the machine, and if need be, adjusted. Adjustments are performed
with tractor's drive off.
for peat meadows it is possible to increase the distance of tines from the ground by shifting
arms of wheels‘ trolley. Unscrew the nut (
1
) and take off washer (
2
), pull out front arm (
3
), and
rotate it 180°. Rotate left (
4
) and right arm (
5
) 180° and swap them (
Fig. 23
),
Fig. 23.
Increasing working width by means of wheel trolley
Fig. 24.
Trolley’s height with a) normal setting, b) increased height
slowly engage PTO clutch and wait until the rake reaches its speed 300÷350 rpm. Adjust
working speed so that the machine rakes clearly.
engage tractor gear and drive slowly into the swath.
Movable linkage adjustment
Fig. 25b
L
and movable upper link
Fig. 25a
G
enable perfect
ground following.
Fig. 25.
Linkage rake
Swapping the left and
the right arm
180
180
1
2
4
5
a
b
6.3"
8.3"
G
a
b
L