Operator’s manual
Rotary rake
Z-300; Z-300 Slim; Z-301; Z-301 Slim;
Z-350; Z-350 Slim; Z-351; Z-351 Slim;
Z-410; Z-440; Z-470
- 20 -
Fig. 20.
Recommended rake setting – a) under normal operating conditions,
b) when operating on an even ground
using lever (
D
) (
Fig. 22
) either lower or lift it to set a required raking height; raking tines
should be set vertically in relation to the ground, not touching the ground however (
Fig. 21
).
Fig. 21.
Rakes in working position – a) proper; b) improper
Fig. 22.
Working height adjustment lever
CAUTION!
It is forbidden to lower raking arms below the level of 0.4"above the ground,
for this may cause damages to the machine such as: bending the raking arms,
breaking the linkage, etc., faster wearing of raking tines, damaging sward and
contamination of the raked feed. Too high a setting of the raking unit may lead
to a risk of not being able to rake up the whole swath.
S1
S2
S1
a
S1
S2
b
a
min. 0.4"
PROPER
IMPROPER
b
D
D