Instruction manual
Two rotor rake
TANGO
- 31 -
9.2.
Disassembly and withdrawal from use
If the rake cannot be repaired anymore, it should be withdrawn from use. Therefore oil from
the frame gearbox should be drained and thoroughly clean any excess oil with cleaning agent, take
parts made of plastic off. They should be used further on or delivered to a proper waste treatment
company. Upon completing the required activities the rake should be sold to breaker's yard.
IMPORTANT:
When dismounting the machine pay particular attention to and additional
dangers, as crushing, cutting, wounding, concussion and abrasion. Use
proper tools and personal protective equipment: protective gloves, clothing
and footwear, eye wear, etc. Pay attention so that the machine works
efficiently, and thus it is required to secure the machine with supports.
10.
WARRANTY CARD
ROTARY RAKE
This product has been checked and deemed fully serviceable and cleared for use
.
NOTE:
Warranty card – if not filled in, corrected or illegible –
is not valid.
11.
WARRANTY TERMS
11.1.
Warranty claim procedure
1.
The manufacturer warrants good quality and defect-free operation of the rake under this
warranty if the rake is operated in accordance with the operator's manual
.
2.
Faults or damages to the machine found within 24-month period from the date of purchase shall
be removed free of charge at the purchaser’s or the manufacturer’s.
3.
Faults or damages should be submitted personally, in writing or by telephone. Repairs shall be
carried out within 14 days. Any repairs under the warranty should be carried out by authorized
SaMASZ service facilities.
4.
Warranty claims regarding the product replacement or repayment are considered within 14
days by the manufacturer.
5.
The following conditions are not covered by warranty:
a)
wear and tear of parts such as: rotors, intersecting axis gears and parts inside the
gearboxes, bushings and sliding elements, clutches, joints, tine holders, raking tines,
bearings, safety curtains, swath guides rubbers, connective elements, etc. These repairs
may be carried out only at the purchaser cost.
b)
use of the machine for any purpose other than described in the operator's manual,
Serial number
Manufacture date
Warrantor’s stamp
Controller’s signature
Date of sale
Seller’s stamp
Seller’s signature
