Instruction manual
Two rotor rake
TANGO
- 24 -
5.10.1. Protection mechanism of front safety curtain
The mechanism is designed to provide protection of front safety curtain against damage in the
event the curtain was not locked in the upper position by shut-off valve, and the rotating working
units will be slid down.
Fig. 32.
Protection mechanism of front safety curtain
This mechanism is operated by means of lever (
1
), which, as the working unit approaches the
rake's linkage, is pushed away by pin (
4
) located on pull-out arm. The lever has a line (
2
) attached,
and with its use, along with the lever, push-off arm (
3
) operates. It is intended to protect the curtain
against damage by pushing it to a safe distance away from an operating rotor. With adjusting nut (
5
)
it is possible to set a safe distance for safety curtain from raking arms of the working unit.
5.11.
Lifting rake on headlands
When lifting arms with working assemblies (
A
) and (
B
) the pawl (
3
) will be locked
automatically in position for headlands (
Fig. 34
). To lift working units to transport position, on the
control panel switch to lifting function (
S
), and then in the initial stage of lifting the working units,
pull the pawl by means of string (
4
) (
Fig. 33
).
Fig. 33.
Preparing rake for headlands
1
2
2
4
5
3
Control panel
(1)
Sequential
lifting
(2) Folding-
unfolding of
working units
2
1
4
3
