Instruction manual
Two rotor rake
TANGO
- 8 -
Transport belts, belt suspensions, ropes cannot be damaged. Whenever damages to these parts
are found, replace them,
When mounting slings, chains, clamps, etc. always keep in mind the center of gravity of the
machine,
For seizing the machines pick lines of adequate length, so that the angle between them was no
greater than 120°, and the angle of inclination between the cable and the vertical was no greater
than 60°,
Collapsible parts should be blocked in transport position,
When relocating the rake onto another vehicle, there should be no unauthorized personnel
permitted to remain within the danger area,
The rake should be protected against moving on the vehicle's trailer.
WARNING!
Securing the maneuver area and providing safety for operation performed is
the responsibility of the person in charge of moving of the machine.
Fig. 5.
Moving machine onto another vehicle for transport
Fig. 6.
Location of center of gravity
4.4.
Working parts
Before operating the rake check condition of both the rotor and raking tines.
Replace any worn or damaged tines immediately.
5
' 9
''
/
1
7
5
0
m
m
13' 6'' / 4115 mm
