Operator's Manual
Round bale wrapper
Spin S, Spin F
- 31 -
Fig. 33. Drive chain adjustment
Check the tightening and the chain conditio periodically after wrapping every 120 bales.
8.7.
Finishing work
After the worki s complete, disconnect the revolution counter and secure the revolution
sensor against humidity. Before storing the wrapping machine for a longer period, place the impulse
sensor in a dry storage room. Place the machine on a hard, flat, level ground. Disconnect the
hydraulic power source and the electric power supply.
Support the drawbar using a support stand. Disconnect the machine’s drawbar from the
tracotr’s hitch.
WARNING!
It is forbidden to disconnect the wrapping machine from the tractor when
there is a bale on the rotary table.
Clean the machine and inspect its conditio paying special attention to the quality of the paint
coat. If it is required to make some touch-ups, it is advised to use the paint repair kit supplied by the
manufacturer. Protect the rubber elements, i.e. hydraulic lines, against direct sunlight.
