25
OPERATOR’S MANUAL
SNOW PLOW
RAM
DEFINING THE TOTAL WEIGHT, AXIS LOAD, TYRE LOAD CAPACITY AND
MINIMUM LOAD
ATTENTION!
Load applied on the front axle cannot be less than 20% of the tractor's overall
weight.
Before using the tractor-machine assembly, check whether these conditions are
met, while calculating and weighing the assembly.
For calculations the following data is necessary:
T [kg] Tractor's overall weight
T
P
[kg] Front axis load on unloaded tractor
T
T
[kg] Rear axis load on unloaded tractor
M
P
[kg] Total weight of machine mounted on front 3-point linkage or weight of front ballast
M
T
[kg] Total weight of machine mounted on rear 3-point linkage or weight of rear ballast
A [m]
Distance between tractor's front axis centre and centre of gravity of machine mounted
on front 3-point linkage / front ballast
B
[m] Distance between tractor's axes
C [m]
Distance between tractor's rear axis centre and centres of ball joints on tractor's lower
links
D [m]
Distance between centres of ball joints on tractor's lower links and centre of gravity of
machine mounted on rear 3-point linkage / rear ballast
Refer to tractor's operation manual
Refer to technical data for machine in operation manual or price list
Dimensions / measurement
3
1
3
1
3
1
3
2
3
2
3
2
3
1
3
2
2
M
P
M
T
T
P
T
T
A
B
C
D
1
2
3
