Operator's manual
Trailed disc mowers
KDC
- 41 -
Tab. 9.
Amount of oil to be filled in cutterbar
Mower type
Oil volume
[US gal lqd]
Oil type
Replacement frequency
KDC – 2,60 m
1.3
80W90
Once every 3 seasons
(with intensive operation)
KDC - 3,00 m
1.6
KDC – 3,40 m
1.7
KDC – 3,90 m
1.85
KDC – 4,30 m
2 x 1.2
7.2.
Intersecting axis gears
Every day before starting work check the oil level and, if needed, refill after having removed
the vent
A
on the top of the gear (
Fig. 43
). The oil level can be checked through check opening
B
on the side of the gear. Please refill the oil until it is visible in the check opening. Oil level in gear:
approx. 0.25 U.S.gal. Removing the old oil from the gearbox is done through the outlet
C
.
Tab. 10.
Amount of oil to be filled in gear
Mower type
Oil volume
[US gal lqd]
Oil type
Replacement frequency
All types
approx.
0.25
SAE 80W/90, API GL-4
Once every 3 seasons
(with intensive operation)
IMPORTANT:
The above instructions should be strictly followed. If the discs in
the cutterbar rotate loosely, do not worry about high intersecting axis gear
temperature; after long working time, it may reach as much as 60-80°C.
Fig. 43.
Points of check and oil replacement in intersecting axis gears
B
A
C
A
B
C
A
B
A
C
B
C
