Operator's manual
Trailed disc mowers
KDC
- 10 -
3.3.
Standard equipment and spare parts
The mowers are sold with the following standard equipment:
warranty card,
operator's manual with spare part catalogue and declaration of conformity,
cutting knives: two sets per mower – left and right knives,
PTO shaft,
spray paint (150 ml),
Optional equipment:
warning triangle,
high mowing toppings / double toppings.
Tab. 6.
Recommended PTO shafts for KDC mowers - Bondioli & Pavesi
Mower
Power Length
Moment
um
Symbol
Clutch
Remarks
HP
mm
Nm
KDC 260 S (T)
KDC 300 S/W (T)
KDC 301 W(T)
KDC 340 S/W (T)
KDC 341 W(T)
74
650-885
710
8G7T065CE007003
Friction clutch = 1200
Nm
1000 rpm
KDC 260 S (T)
KDC 300 S/W (T)
KDC 301 W(T)
KDC 340 S/W (T)
KDC 341 W(T)
47
650-885
830
8G7T065CE007002
Friction clutch = 1450
Nm
540 rpm
Fig. 3.
PTO shaft lubrication points; Mounting directions.
NOTE:
PTO shaft lubrication frequency must be respected. Lubrication points
marked on
Fig. 3
should be lubricated every 50 hours.
PTO shaft shall also be lubricated before and after longer idleness periods.
PTO shafts of other brands with equivalent parameters could be used after first obtaining
SaMASZ permission.
NOTE:
Optional extra equipment should be ordered separately.
PTO shaft end without
clutch – To be mounted
on the tractor side
PTO shaft end with overload
friction clutch – To be mounted
on the mower side
