Operator's manual
Trailed disc mowers
KDC
- 39 -
Fig. 37.
Steps to be taken when transporting in vertical position. Mower shall be leaned to the front so the
distance between conveyor and the ground is approx. 3' 3".
1.
Loosen bolts M10 –
S
1
, nuts M12 –
N
2
adjustment bolts M12 –
S
2
of front tensioners (
Fig. 38
).
Fig. 38.
2. Dismount front belt in lower part of the conveyor
P
(
Fig. 39
). Slide belt
T
down (
Fig. 40
).
Fig. 39
.
Fig. 40.
3.
Clean and check condition of bearings in rollers – worn ones shall be replaced.
4.
Mount the new belt upwards.
5.
Mount front belt
P
.
6.
Mount front tensioners and tighten rear tensioner.
II.
Maintenance of belt conveyor adjusted in "work" position.
P
T
approx. 1
Driving roller hydraulic
engine
(do not adjust)
0.1"
measure
S
1
S
2
N
S
1
S
2
N
2
N
2
S
1
S
2
