Operator's manual
Trailed disc mowers
KDC
- 31 -
Fig. 28.
Adjustment of swath guides: 1- swath guide, 2 - adjustment bolt
In order to set swath width, perform adjustment of swath guides (
1
) (
Fig. 29
) (applies to
KDC W):
loosen eye screw (
2
) of swath guide,
set swath guide (
1
) as needed,
tighten bolt (
2
).
Fig. 29
.
Adjustment of swath guides: 1- swath guide, 2 - adjustment bolt
6.5.
Adjustment of clearance between conditioner plate and roller
(Applies to
KDC S
)
Depending on size and quantity of cut grass, it may be necessary to modify settings of
conditioner plate. The higher, denser the grass, the bigger the clearance between plate and roller
should be. Proper setting should be performed experimentally, so conditioner is not choking and
PTO shaft overload clutch is not turning on. Manner of conditioner plate adjustment is provided in
Fig. 30
.
1
2
1
1
2
1