Operating manual
Rear flail mower on a pantograph
KBRP 160; KBRP 200
- 17 -
6.2.4.
End of season maintenance
After the end of mowing season the mower should be carefully cleaned and washed and after
drying all working surfaces and suspension pins should be protected from rust by lubricating with
grease. Additionally:
touch up any chips in the paint,
check the oil levels in the miter gear (Pic. 17).
7.
LUBRICATION
7.1.
Miter gear
Everyday before starting work the oil level should be checked and if necessary refilled by
removing plug A in the upper part of the gearbox (Pic. 17). The oil level is checked by removing
the control plug B on the side of the box. If the oil level is too low replace it until it appears in
the control opening "B". The amount of oil in the gearbox is about 1 liter. Oil levels should be
checked with the mower on level ground.
Pic. 17. Miter gear oil control and changing points
7.2.
Bearings and joints
Mower type
Amount of
oil
[l]
Oil type
Changing frequency
All types
1
Hipol 15 GL - 4
once every 3 seasons
(with heavy use)
B
A
Lubrication point
Lubrication point
B
A
