SaMASZ AlpS 271, Operator'S Manual

Page: 24 / 42

24
ALPS / OLIMP SNOW PLOW OPERATOR’S MANUAL
ATTENTION:
Upon plow’s mounting, examine condition of bolt connections and safety
elements .
ATTENTION:
Before starting work, check and control the tightness of the bolts of the wires
with increased current
.
Fig. 22. Heavy current cables inspection place
Plow features possibility of adjusting pressure onto the ground (unloading). In order to make
use of this function:
❑
lower the plow so it does not contact the ground onto so it is 5÷10 cm above the surface,
❑
read out pressure value from the gauge,
❑
next while lowering the plow with use of vehicle's hydraulics set pressure by 5÷10 bar less than
shown on pressure gauge .
5.3. Plow transport and parking positions
5.3.1. Transport and parking positions of the AlpS and Olimp plow
When driving on public roads respect road traffic rule .
ATTENTION!
When transported the plow should be in stable position enabling its safe
transport
.
During AlpS and Olimp plow transport it should be lifted and prevented from lowering on its own (ex.
locking the tractor's TPH). When standing the plow mounted on the tractor should have the plowshare
resting on the ground (
Fig. 23a ). Plow not connected to the tractor's TPH should be resting on the
support foot ( C ) ( Fig. 12 ) . In all positions mentioned above the plow should be in the retracted position
meaning with the actuators retracted ( Fig. 27c, Fig. 28c ) .
Wires with
increased
current