21
OPERATOR’S MANUAL
SNOW PLOW
ALPS / OLIMP
1
2
3
LED
5.2.1.
AlpS and Olimp plow standard control
Hydraulics control lever is used to rotate shield. Switching between right and left plow's shield is
possible thanks to switch (
B2
) on control panel (
B
). In order to turn clearance lights on/off use switch
(
B1
) on control panel (
B
). Switching on is signaled by flashing diodes above the switch.
In order to extend life of coil on electric valve the driver automatically switches to left wing after one
minute.
Fig. 17.
Controlling the
AlpS
and
Olimp
plow.
A
–
Cigarette lighter outlet,
B
–
Control panel (
B1
–
marker light
switch,
B2
–
moldboard control switch
–
right/left),
C
–
Front TPH and hydraulic system control lever (* - this is
different in different types of tractors)
5.2.2.
Optional control with AlpS and Olimp plows
–
Multi Plus
In AlpS and Olimp plows it is possible, on individual request, to install a two-button control panel as
provided in
which cooperates with a 2-cartridge valve (
Z
).
Fig. 18.
Optional control panel Multi Plus
1
– Controlling right shield (indicated by button-corresponding LED);
2
– Controlling left shield (indicated by button-corresponding LED);
3
– Simultaneous control of both shields (clearing snow either to the right or to the left). The function can be
activated by pushing an active button
1
or
2
again – both LEDs are off
Clearance lights turn on automatically after powering the controller, which is indicated by a LED
on the controller. They cannot be turned off by means of the control panel.
1
– Controlling right shield (indicated by button-corresponding LED);
2
– Controlling left shield (indicated by button-corresponding LED);
3
– Simultaneous control of both shields (clearing snow either to the right or to the left). The function
can be activated by pushing an active button
1
or
2
again – both LEDs are off.
B1
B2
C*
A
B
LED
Z
