17
OPERATOR’S MANUAL
SNOW PLOW
ALPS / OLIMP
Fig. 11.
Mounting the AlpS and Olimp plow on a cat II, or III, three point hitch
In order to mount the plow on the tractor:
❑
approach the plow so that the lower lifting arms of the
three point hitch are inserted into the
mountings of the plow's suspension,
❑
secure the mounting using pins and cotter pins,
❑
connect the upper part of the suspension system using a regulated tie and secure them with a pin
and cotter pin (
),
❑
next connect the hydraulic connections and the power plug along with the control switch,
❑
the rotation axis of the moldboards should be perpendicular to the
ground,
❑
after lifting the plow the support foot should be lifted and secured with a pin,
❑
if the plow has been equipped with support wheels or skids they should be adjusted to the correct
height.
Fig. 12.
Connecting the AlpS and Olimp plow on a cat. II three point hitch.
A – Pins with cotter pins, B – Hydraulic connections, C – Support foot, D – Electric outlet,
E – Lower TPH arms, F – Upper TPH regulated tie, G - Rotation axis of the moldboards
Secure the pins of the
mount with cotter pins
Open and connect
the hydraulic connections
to the tractor
90
°
G
D
C
A
E
F
B
