Sam4s SPS-500 Operator'S Manual Download

Page: 98 / 141



Reports

SAM4s SPS-500 Operator Manual v1.2

X Mode Program

The following function are found on the X MODE PGM menu:

Time Clock Edit

If an employee forgets to clock in or out, authorized persons can use the time clock edit function to correct or
add time incorrect clock entries.

Turn the key lock to the

position.

Touch

X MODE PGM

and then

TIME CLOCK EDIT

Select the period to be edited,

X/Z (DAILY) EDIT

, or periodic edits, if they are used.

Enter the Employee #, touch

. The Time Clock Edit screen displays:

Touch the field to be corrected, and then enter the correct time and touch

. Use the

PAGE UP

and/or

PAGE DOWN

keys as necessary to display all records.

When corrections are completed, touch

SAVE

to exit with changes saved.

Summary of Contents for SPS-500














































































































































Search results

Summary of Contents for SPS-500

Reviews:

Related manuals for SPS-500

Brands by name

Popular brands

Sam4s SPS-500, Operator'S Manual

Search results

Summary of Contents for SPS-500

Reviews:

Related manuals for SPS-500

Brands by name

Popular brands