Sam4s SPS-500 Operator'S Manual Download | Manualshive

Page: 44 / 141

background image

44



Basic Operations

SAM4s SPS-500 Operator Manual v1.2

Auto Grill Item

Some items may be programmed as "AUTO GRILL" so they will always be sent to the designated grill
printer. The advantage of using auto grill is the item is sent to the printer immediately when the next item is
registered, or when the

PRINT

key is pressed/touched. This allows for speedy service in quick service

environments.

1.

Enter the auto grill item and condiments or instructions.

2.

Enter the next item or press or touch the

PRINT

key to send the item and instructions to the kitchen

printer group identified in the PLUs status group at "K-GRILL GROUP #".

Promo

The

PROMO

key allows the operator to account for promotional items (i.e. by two, get one free). This key

will remove the cost of the item from the sale, but not the count. In the case of by two, get one free the count
remains three items, but the customer is only charged for two.

1.

Register the items to be sold.

2.

Press or touch

PROMO

.

3.

Register the items to be promo'd.

Void of Promo Items

The promo item must be voided before the charged item. For example, if a hot dog and a promo hot dog are
registered, the promo hot dog must be voided before the paid hot dog is voided. If more than one paid hot
dogs are registered, the promo hot dog must be voided before the last paid hot dog is voided.

Waste

The

WASTE

key allows control of inventory by accounting for items that must be removed from stock due to

spoilage, breakage, or mistakes. The

WASTE

key may be under manager control, requiring the manager

code entry. The

WASTE

key is not allowed within a sale.

1.

Press or touch

WASTE

.

2.

Register the wasted items.

3.

Press or touch

WASTE

to finalize.

Price Inquiry

Use the

PRICE INQ

key to check the price of an item without registering it.

1.

Press or touch

PRICE INQ

.

2.

Press or touch the PLU item key on the screen or enter the PLU number and press or touch the

PLU

key.

3.

Press or touch the PLU key again if you wish to register the item.

«
...
42
43
44
45
46
...
»

Summary of Contents for SPS-500














































































































































Reviews:

No comments

Related manuals for SPS-500

Brand: VALERA Pages: 2

Brand: V-Count Pages: 71

Brand: Fluke Pages: 198

Brand: Datecs Pages: 48

Brand: AccuBANKER Pages: 19

Brand: Sam4s Pages: 9

Brand: Sam4s Pages: 194

Brand: Olivetti Pages: 96

isiLine ISI30 Series

Brand: ivo Pages: 16

Brand: TEC Pages: 48

COUNT-200-DELUXE-US

Brand: Labelmate Pages: 2

Brand: Olympia Pages: 5

Brand: HANYOUNG NUX Pages: 4

Brand: CHD Pages: 76

Brand: Steinberg Systems Pages: 84

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands