Sam4s SPS-500, Quick Setup Manual

Page: 40 / 63

- 40 - SPS-500
Receipt Graphics
The bitmap images can be stored either in the printer or sent via the PC to the SPS-500 and then to the
printer. Used when the images are to change frequently and it is not possible to connect the printer to the PC
each time for image downloading. The following section, assumes the images have been downloaded to the
printer, using the correct printer utility.
External Image Printing Receipt Header
Using the printer utility and the documents supplied, download the images to the printer
•
Ensure within S-MODE – DEFINE PORT that printer is programmed to the port
•
Ensure within PGM-MODE – PRINTER & KV ROUTING menu the receipt printer is programmed
•
Within the S-MODE – PRINTER DRIVER SELECTIONS select the required printer type and select
the LOGO option. The current setting should be changed to the appropriate printer control command
found within the printer manual for example the SRP350 is 1c7xxx where xxx is image No.
External Image Printing PLU Images
The following section allows printing of a graphical image per product status group
•
Using the printer utility and the documents supplied, download the images to the printer
•
From the PGM-MODE menu select PLU then PLU STATUS GROUP and enter the image number in the
LINKED NV IMAGE # section