Sam4s ER-430M Page 178 Operation And Program Manual Download

Page: 178 / 191

168

•

Contents

ER430M Electronic Cash Register AU

Program Scans

Since much time and energy has been invested in the planning and programming of your

ER-430M

, it

is advisable to print a hard copy of the final program for future reference. This copy should be kept in
a safe place.

Program 15 - Program Scans

Turn the control lock to the

PGM-Mode

To print a program scan, enter

1 5

, press the

SBTL

key.

SBTL

In this step, there are three different ways to scan program information. One is PLU, the
other is Macro, and the third is Others.

PLU PROGRAM SCAN

•

To read single PLU program information, enter the number (1-1000) of the PLU and
press the same number and PLU key.

PLU

Enter the PLU#,

up to 15 digits

Enter the PLU#,

up to 15 digits

PLU

•

Press a PLU key on the keyboard and press same key again.

PLU 1

•

To read multiple PLU program information, enter the first number (1-1000) and press
PLU key. Press the last number (1-1000) and press PLU key

PLU

Enter the first PLU#,

up to 15 digits

Enter the last PLU#,

u p to 15 digits

PLU

•

Press a PLU key on the keyboard.

PLU 1

PLU 10

MACRO PROGRAM SCAN

•

To read MACRO information, press the MACRO key to be scanned,

MACRO#

Summary of Contents for ER-430M
































































































































































































Search results

Summary of Contents for ER-430M

Reviews:

Related manuals for ER-430M

Brands by name

Popular brands

Sam4s ER-430M, Operation And Program Manual

Search results

Summary of Contents for ER-430M

Reviews:

Related manuals for ER-430M

Brands by name

Popular brands