background image

 

44  

    Advanced Operating Instructions 

SAM4s ER-265 Operator's and Programming Manual v1.14 

No Sale Operations 

Open Drawer 

The 

#/NO SALE 

key will open the cash drawer when you have not already started a transaction.   

 

1.

 

Press

 #/NS

 

 

#/NS 

 

2.

 

The drawer will open and the receipt will 
print as in the example on the right.     

 

       THANK-YOU 

      CALL  AGAIN 

 

OPEN DRAWER 

15:40           03-01-2006 

000048    CLERK  1      00 

Non Add Number 

You can also use the 

#/NO SALE 

key to print any number (up to 8 digits) on the printer paper.   

You can enter the number any time during a transaction.    For example, if you wish to record a 
charge account number, enter the number and press the #

/NO SALE 

key before totaling the sale 

with the 

CHARGE

 key.   

 

1.

 

Register the items you wish to sell. 

2.

 

Enter the number you wish to record, for 
example enter:   
 

 

 

3.

 

Press 

#/NS: 

 

 

#/NS 

 

4.

 

Press 

CHARGE

 

 

CHARGE 

 

5.

 

The display will indicate “=” for total, the 
drawer will open and the receipt will print 
as in the example on the right.     

 

       THANK-YOU 

      CALL  AGAIN 

 

DEPT.1    T1         $2.99 

NON  ADD  NO.           1234 

TAXABLE1             $2.99 

TAX1  AMOUNT          $0.18 
CHARGE                $3.17 

15:40           03-01-2006 

000049    CLERK  1       00 

 

Summary of Contents for ER-265











































































































Reviews: