System Extension & Disassemble
Part
4
1. Operating Voltage of 2 Lind Display is 5V.
you can refer to Appendix A. BIOS Set up – 02.
Serial voltage change & Using Keyboard shortcut to
set the Voltage of COM4
2. 2 Line Display
26
3.
Push & Pull the System Cover in the direction of the arrow to disassemble.
4. Remove the Upper Cover
5. Please mount 2 Lind Display as below picture then fasten 2 screws.
2.
Confirm that the power of peripherals and systems are turned off.
.
• Before connecting
2 Lind Display, please check Voltage set up of COM4.
If it is set as 12V, Display will be damaged.
Summary of Contents for 110 Series
Page 1: ......
Page 86: ...System Configuration Appendix B MAIN 4 Part list 84...
Page 89: ...System Configuration Appendix B 38 1cm 15 Main Display 87 4 Part list...
Page 106: ......
