Sam4s 110 Series, User Manual

Page: 2 / 106

Table of Contents
System Introduction
System Installation
Part 1
Part 2
Part 3
System Utilization
Part 4
System Extension & Disassemble
Appendix A
UEFI BIOS Set Up
Appendix B
System Configuration
1. Safety Notices Before Installation or Use
2. System Introduction
3. General Specifications
4. Optional Specifications
5. Name and Function of each component (Front View)
6. Name and Function of each component (Rear view)
7. Name and Function of each component (I/O)
8. Name and Function of each component (I/O - Option)
1. Checking the Location for Installation
2. Before Connecting Peripherals
• Interface cover remove
• Cable arrange cover remove
3. Connecting DC power supply cable
1. Touch Screen Usage
2. POS Driver and Utility Introduction
3. Dual Monitor Usage
4. Dual Monitor Touch Screen Usage
5. How to control Direct I/O in order to use drawer
1. Power Adaptro
2. 2 Line Display
3. Dual Display
4. IC Card Reader
5. 2.5” SDD/HDD
6. Basic I/O Module
7. M.2 / M.2 RAID
8. Memory
9. Expansion I/O Module
10. Main Board
11. Main Display
12. Touch Panel & LCD
• 15 inch Main Display
• 15.6 inch Main Display
1. Understanding BIOS
• Understanding BIOS Set up
2. Serial voltage change & Using Keyboard shortcut
1. System Block Diagram
• J1900
• i3 / i5
2. Main Chipset & Connector
• J1900
• i3 / i5
• I/O Board
3. Main Jumper Setting
• J1900
• i3 / i5
4. IO Pin Map
• COM1/2 RS-232 Serial Port
(DSUB9 MALE)
• COM4 RS-232 Serial Port (RJ45)
• USB Port (TYPE A)
• COM1 RS-422/485 Serial Port (DS
UB9 MALE)
• Cash Drawer Port (RJ11)
• COM3 RS-232 Serial Port (RJ45)
• LAN Port (RJ45)
• Parallel Port (D-SUB25 FEMALE)
1. Part List
• MAIN
• 38.1cm(15”) Main Display
• 39.62cm(15.6”) Main Display
• Main Body
• I/O Module
• Expansion I/O Module
• I/O Cover
• MSR
• MSR+SCR
• Dallas/Finger Printer
• 9.7inch Dual Display
• 15inch Dual Display
• 10.1inch Dual Display