Sam TANDEM-AXLE, Instructions And Parts Manual

Page: 12 / 18

P12
MACHINE REAR-VIEW - For 8 & 9 Tonne Computer Controlled Spreaders - Both 400 & 800 wide belts
REFERENCE PART NUMBER DESCRIPTION QTY.
1 P4751 Danfoss OMP50/9 Hydraulic Motor 2
2
P4666 Skirt Pressing (S/S) - (inc. Rivets)
Specify left/right
2
P4709 Skirt Rubber & Rivet Set - x2 (4.0 x 80mm) + 34 Rivets 2
3 P3068 Floor-belt and Chain (Complete)
for 8 or 9 Tone Combo
1
4 P4882 Spinner Tube Mounting Frame 1
5 P4857 Def Divider S/S Panel (Complete) 1
6 P2101 Back Door Jack
for 800 wide belt
1
7 7311 Hydraulic Flow Control Valve - HCV 3749-1 1
8 P440 Flexi Coupling CA90 - 25mm/1” 2
9 3424 UNF Nyloc Nut 1 1/4” & Grubscrew 3/8” 2
10 4024 Bearing & Housing - Pillow-Block 50mm (P210) 2
11 P4835 Back Shaft - 50mm (Complete inc. 5T Sprockets) 1
12 P20G Spinner Tube - Complete 1
13 P4684 Spinner Vanes - Set 5CR12 Vanes + Welded Bis Inserts 1
* Floor-Belt and Chain, Skirt Pressings, Couplings and Back/Front Shafts vary depending on machine model, size and year
of manufacture. Please include the machine serial number with all parts and servicing enquiries.
1
2
5
4
3
6
7
9
8
10
11
12
13
NB: the image above is an 8 Tonne SAM Combo Spreader with an 800 wide floor belt.