Sam TANDEM-AXLE, Instructions And Parts Manual

Page: 11 / 18

P11
1
2
5
4
3
6
7
9
8
10
11
12
13
SPARE-PARTS FOR COMPUTER CONTROLLED SPREADER
MACHINE REAR-VIEW - For 4, 5, 6 Tonne Computer Controlled Spreaders - Both 400 & 800 wide belts
REFERENCE PART NUMBER DESCRIPTION QTY.
1 P5077 Danfoss OMP50/9 Hydraulic Motor 2
2*
P3040 Skirt Pressing (S/S) - (inc. Rivets)
specify left/right
2
P4686 Skirt Rubber & Rivet Set - x2 (2.77 x 80mm) + 34 Rivets 1
3* P3067 Floor-belt and Chain (Complete)
for 4, 5, 6 Tonne 800 wide belt
1
P0391 Floor-belt and Chain (Complete)
for 4, 5, 6 Tonne 400 wide belt
1
4 P4882 Spinner Tube Mounting Frame
for 800 wide belt
1
P202 Spinner Tube Mounting Frame
for 400 wide belt
1
5 P4857 Def Divider S/S Panel (Complete) 1
6 P2809 Back Door Jack
for 400 wide belt
1
P2101 Back Door Jack
for 800 wide belt
1
7 7311 Hydraulic Sensor Valve HCV 3749-1 1
8 0440 Flexi Coupling CA90 - 25mm/1” (with rubber insert) 2
9 3424 UNF Nyloc Nut 1 1/4” & Grubscrew 3/8” 2
10 P4695 Mollybush Bearing and Housing
Check the length - long or short
2
11 P4683 Back Shaft - 50mm (Complete inc. 5T Sprockets)
for 800 wide belt
1
P4664 Back Shaft - 50mm (Complete inc. 5T Sprockets)
for 400 wide belt
1
12 P20H Spinner Tube - Complete
for 800 wide belt
2
P20C Spinner Tube - Complete
for 400 wide belt
2
13 P2103 Spinner Vanes - Set 5CR12 Vanes 1
* Parts vary depending on machine model, size and year of manufacture. include your serial number with parts enquiries.