Salvis VitalityEVO-Easy, Operating Instructions Manual

Page: 58 / 80

58 / 80
10.2 Data import: information about the "Replace/Add" key
Area
Import
Sounds
Import options Replace Add
Import
Images
Cookbooks
User configuration
When you access the menu, "Add" is activated.
Important: when the "Replace" function is used, the folder
content is first deleted before copying the data from the USB
drive.
Function "Replace" means:
1. All files in the relevant folder in the con­
trol system are deleted.
2. The files from the USB drive are copied
to the relevant folder.
Exercise care when using!
Example: if the control system contains
three cookbooks but there is only one
cookbook on the USB drive, the "Replace"
function will copy only one cookbook to
the control system. This means the control
system now has only one cookbook.
Should be used if you want to standardise
data across all appliances (e.g. you want
to use the exact same cookbooks across
all appliances).
"Add" means:
Add files.
When to use
Should be used if you want to add data
with a new filename.
Sounds 1. Important! All existing sounds in the
"sounds" folder will be deleted.
2. The sounds on the USB drive are co­
pied to the "sounds" folder.
Sounds with different filenames are added
to the "sounds" folder.
Sounds with identical filenames are not
changed.
Images 1. Important! All existing images in the
"pictograms" folder will be deleted.
2. The images on the USB drive are co­
pied to the "pictograms" folder.
Images with different filenames are added
to the "pictograms" folder.
Images with identical filenames are not
changed.
Cookbooks 1. Important! All existing cookbooks in the
"cookbooks" folder will be deleted.
2. The cookbooks on the USB drive are
copied to the "cookbooks" folder.
Cookbooks with different filenames are
added to the "cookbooks" folder.
Cookbooks with identical filenames are
not changed or overwritten.
Example: The cookbook "Kochbuch_DE"
exists. To add "cookbook_EN", the correct
import function in this case is "Add".
User confi­
guration The "userconfigmain.cfg" and "speci­
alpreps.xml" files will be overwritten.
The appliance must be restarted to ac­
tivate the new user configuration.
Not available.