Operating Instructions
73 / 92
13.3.1 Cleaning the water manifold
CAUTION Risk of burning!
Wear protective gloves and protective clothing!
D
The water manifold must be cleaned before
starting the automatic cleaning process!
.
Release and remove the knurled screw on the
water manifold by turning it anticlockwise.
.
After cleaning, fully tighten the water manifold by
hand.
13.3.2 Cleaning the outlet screen in the cooking chamber drain
CAUTION! Risk of burning!
Wear protective gloves and protective clothing!
.
Remove food residues from the cooking chamber
and outlet screen to allow the water to drain du
ring automatic cleaning.
D
Attention!
Do not remove the mounting screw in
the outlet screen! The outlet screen may only be
removed by the authorised Customer Service for
maintenance tasks!
13.3.3 Using the sealing plate Type 2011/2021
Caution, risk due to bruising on the feet!
Before unlocking or swivelling the sealing plate downwards,
remove the sealing plate from the swivel area. With the right foot, activate the unlocking lever!
The sealing plate is required in order to completely close the cooking chamber,
−
if the appliance is operated without rack trolley (e.g. for preheating),
−
for automatic cleaning without rack trolley pushed in.
Engaging of the sealing plate
.
Swivel the sealing plate to the rear and upwards
until it automatically engages.
Using the sealing plate
D
Caution, sealing plate automatically swivels out!
D
Make sure that no persons are in the swivel area
of the sealing plate.
.
With the right foot, push the unlocking lever up
wards.
D
The sealing plate swivels downwards.
.
Raise the sealing plate and swivel towards the
cooking chamber.
Mounting screw for water
manifold at the top centre in
the cooking chamber
Water manifold with
knurled nut
Outlet screen screwed down
tight
Do
not
remove the mounting
screw!
Sealing plate
Unlocking
lever
