4
VS20WRF and VS20BRF Installer Manual
Product Compliance & Safety Information
Installer parameter settings
The SALUS VS20 are equipped with installer parameter
section (see page 71) this must only be entered by
the installer or competent person. Changing these
parameters can have a serious effect on your heating
system
For the installer
Please enter any parameter changes in the installer
notes section (pages 111)
230V AC
Sources of danger
The thermostat must be disconnected from main
supply before removing the cover.
Emergency
Switch off the voltage to the individual thermostat
wring centre or complete system.
Warning
Always isolate the AC Main supply before
installing or working on any components that
require 230 VAC 50Hz supply.
This product complies with the essential requirements
and other relevant provisions of Directives 2014/30/
EU, 2014/53/EU (2014/35/EU for VS10WRF/VS10BRF)
and 2011/65/EU. The full text of the EU Declaration
of Conformity is available at the following internet
address: www.saluslegal.com.
Product Compliance
