Installation - Testing Pairing with System Receiver RX2
Long press to exit to
home screen or
continue to change
device settings.
Refer to page 40.
VS20WRF and VS20BRF Installer Manual
43
Use to
increase
temperature to
30ºC and then
press
Green LED on
Green LED off
Use to
decrease
temperature to
10ºC and then
press
If you are using the
optional system
receiver configured
to RX1 please check
that the green light
goes on when the
temperature is
raised and off when
reduced.
If pairing for your system is complete, please take the coordinator
out of pair mode. Press for 5 seconds and light will stop flashing.
PAIRING WITH R
X2
iT600 VS20W - Installer - User Manual 011_Layout 1 07.07.2014 10:37 Stron
