background image

68

The 

SQ610RF Quantum Thermostat

 requires no special maintenance. Periodically, the outer casing can be wiped 

clean using a dry cloth (please DO NOT use solvents, polishes, detergents or abrasive cleaners, as these can damage the 
thermostat). There are no user serviceable parts within the unit; any servicing or repairs could only be carried out by 

Salus Controls

 or their appointed agents.

12. Cleaning and Maintenance

13. Technical Informations

14. Warranty

SALUS Controls warrants that this product will be free from any defect in materials or workmanship, and shall
perform in accordance with its specification, for a period of five years from the date of installation. SALUS
Controls sole liability for breach of this warranty will be (at its option) to repair or replace the defective product.

Power Supply

Built-in Li-ion 3,7V Battery

Charging voltage (no charger included) Micro-USB 5V DC, min 0,5A

Temperature range

5-40°C

Display temperature accuracy

0.5°C or 0.1°C

Control algorithm

ITLC
SPAN (±0.25°C / ±0.5°C)
THB

S1-S2 input (multifunctional input)

Floor temperature
Air temperature
Occupancy sensor
One Touch
Changeover (heating/cooling)

Communication protocol

ZigBee 2,4GHz

Mounting

Surface mounting

Working temperature

0-45°C

IP protection class

IP30

Dimensions (Width x Height x Deep)

86 x 86 x 11 mm

Summary of Contents for QUANTUM SQ610RF





































































Reviews: