18
'
Salus
User'
Manual
'
Daylight Savings Time
ON
– Daylight Savings Time is observed (default)
OFF
– Daylight Savings Time is NOT observed
SETTINGS
Country – sets operating limits and defaults for time zone and
temperature units
US
– United States values
CA
– Canadian values
HVAC Type
HP
– Heat Pump
O
– O reverse valve (default)
B
– B reverse valve
NON-HP
– Electric, Gas, or Oil heat
FAN HG
– Fan functionality for gas heating (default)
FAN HE
– Fan functionality for electric or oil heating
Temperature Units
º
F
– Use Fahrenheit units for temperature (US default)
º
C
– Use Celsius/Centigrade units for temperature (CA default)
OPTIMA'ZigBee'Thermostat'
11
'
'
Initial'Configuration'
After inserting the batteries, the display will flash all the segments,
followed by the firmware version number, then display
US / CA
with a blinking
US
.
When configuring the thermostat, select the desired option by
pressing the + or – button or using the slider ring to cause the
desired value to blink, then pressing MODE.
Using the table below, select your country, then your type of system.
Blinking Value Description
US
United States – Configures thermostat for use in the US.
CA
Canada – Configures thermostat for use in Canada
HP
Heat Pump
NON-HP
Non Heat Pump – Gas, electric, or oil heat
O
Heat Pump with O reverse valve
B
Heat Pump with B reverse valve
HE
Electric Heat
HG
Gas or Oil Heat
After the initial configuration, the thermostat will display the Home
Screen, at which point it is ready to be attached to the Mounting Plate.
