50
Tel: 886.2.2175 2930 Email: [email protected]
www.salukitec.com
11
．
Check the device status
Open Device manager and check the device status. If the driver is installed successfully, it will under NI-VISA USB devices, please see
the screen shot below:
12
．
Telecommunication
Double click SARemoteControl software. Select USB table and click connect. No warning pops out and S3331 is connected. User can
type in SCPI command to control or fetch data.
6.3.2.
LAN connection
S3331 can be connected to LAN, user can use the Saluki remote control software to manage S3331. LAN connection not only provide
SCPI command control, but also provide a UI. It is a mapping of the keys and display of the S3331.
1
．
Connect S3331 into LAN
Use CAT6 cable connect S3331 to a LAN or to PC directly.
2
．
Set PC and S3331 in the same sub-network
For example, set IP address to 192.168.1.1 (255.255.255.0), set S3331 IP address to 192.168.1.2 (255.255.255.0)
3
．
Double click the software icon
Fill S3331 IP address, use default port number and delay. Then click “Connect”
6.4.
UI
Saluki SA Remote Control software provides 2 method for remote control.
SCPI command (USB connection can only use this way)
Keys and display (LAN connection only)
