19
Tel: 886.2.2175 2930 Email: [email protected]
www.salukitec.com
300MHz input signal, and set the [CF Step Auto Manual] as Manual, and input 300MHz. If the current center frequency is 300MHz, press
the stepping key to increase the center frequency to 600MHz. Press the stepping key again to increase the center frequency by 300MHz
to 900MHz. The shaded status of [CF Step Auto Manual] menu indicates whether the step is set as Auto or Manual. When the step is
under Manual, select the Auto from [CF Step Auto Manual] to return to Auto status.
[Frequency Offset]
Menu description: to add the set frequency offset to the displayed frequency value, including marker frequency value, but this does not
affect the sweep span. Use number keys, stepping keys or knob to change the offset.
[Frequency Ref]
Menu description: to switch between internal reference signal and external reference signal. When use external reference, need to
connect a 10MHz reference source to the Ext Ref port.
4.5.
Marker
Pop up the soft menu related to markers, including [Marker 1 2 3 4 5], [Trace 1 2 3 4 5], [Delta], [Normal], [OFF], [All off], [Marker Table
ON/OFF], [Marker ->], and [Marker Function].
[Marker 1 2 3 4 5]
Menu description: S3331 supports 5 markers simultaneously. Only one is activated. [Marker 1 2 3 4 5] is used to select the activated
marker. If the selected marker is not created, user can use [Normal] or [Delta] to create and activate the marker.
[Trace 1 2 3 4 5]
Menu description: Move the selected marker to other traces.
