46
Tel: 886.2.2175 2930 Email: [email protected]
www.salukitec.com
6.
Remote Control
User can program the S3331 via the standard SCPI (Standard Commands for Programmable Instruments) command. For a detailed
description of the commands and programming, refer to Appendix A S3331 Handheld Spectrum Analyzer Programming manual.
Users can also use the the PC software (SA Remote Control) provided by Saluki to get remote access to S3331 via LAN or USB port.
When S3331 is connected to controller, all operations should be done on controller. The keys on S3331 will not work. When disconnect
S3331 from the controller, press ESC key to unlock other keys.
6.1.
OS supported
USB connection: Win XP, Win 7(32bit)
LAN connection: Win XP, Win 7(32bit/64bit)
6.2.
Software Installation Procedures
1
．
Copy the installation file zip pack into controller or a PC and un-zip it.
Saluki provide 2 installation for different Operation Systems
SALUKI SARemoteControl_x64 for Windows 7 64bit
SALUKI SARemoteControl_x86 for Windows 7 32 bit or Windows XP.
User may select the installation file based on their own operation system.
2
．
Open the folder and following items are contained in it.
DotNetFX40 is the netframe work 4.0, if the controller already have framework 4.0 or higher revision installed, user do not need to
install it.
WindowsInstaller3_1 is NI VISA support. It is a necessary component of the software
SALUKI SARemoteControl: The installation file of the software.
Setup: double click this file, it will run and detect the installation environment. Then install the software automatically.
3
．
Double click the “setup” file, following window pops out. Click “Next”
