30
Tel: 886.2.2175 2930 Email: [email protected]
www.salukitec.com
Menu description: Set the screen brightness
[Calibration]
Menu description: Calibrated the instrument
[Service]
Menu description: This function is not open for end user.
4.11.
Trace
Press [Trace] key on the front panel to pop up corresponding soft menu. Including: [Trace 1 2 3 4 5], [Clear Write], [Max. Hold], [Min.
Hold], [Bland], [View], [Detector], [Operation ].
[Trace 1 2 3 4 5]
Menu description: to select trace. The signal/spectrum analyzer provides 5 trace lines Trace 1, Trace 2, Trace 3, Trace 4, Trace 5.
[Clear Write]
Menu description: to set the current trace processing as Clear Write, i.e., clear all data of displayed trace and continue the signal trace
receipt under sweep status.
[Max. Hold]
Menu description: to set the current trace processing method as maximum hold, i.e., the new trace data will be assigned with maximum
